IMC Networks iMcV-S2MM Manuel d'instructions télécharger pdf (Page 6)

LEDs on iMcV-LIM

The LED functions are as follows:

LL Glows green when FX LinkLoss is enabled.

LNK Glows green when a link is established on the port.

XMT Blinks green when port is transmitting data.

RCV Blinks yellow when port is receiving data.

FA* Glows green when FiberAlert is enabled.

*FiberAlert is not available/applicable on single-strand versions of iMcV-LIM.

LEDs on iMcV-S2MM/S2SM/M2MM

The LED functions on iMcV-S2MM/S2SM/M2MM are as follows:

ENA Glows green when port is enabled.

ACT Glows yellow in normal operation, indicating that fiber

is connected and the receiver is seeing light pulses.

(As these are protocol-independent modules, there is

no true link signal available.)

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Pas de commentaire

IMC Networks iMcV-S2MM Manuel d'instructions Page 6