IMC Networks Giga-AccessEtherLinX-II Manuel d'instructions télécharger pdf (Page 32)

Using Telnet

Assign the Giga-AccessEtherLinX-II an IP Address or use the default IP Address

10.10.10.10, subnet mask 255.0.0.0 before using a Telnet session. All configurations

done via the console port can also be performed using Telnet. The user should only

open one Telnet or RS232 console session at a time. Do not use an RS232 console

session and a Telnet session at the same time as unexpected results may occur.

LED Operation

Downlink Ports

LNK/ACT Glows green when link is established on port.

Blinks green during data activity on port.

FDX/COL Glows green when port is operating in Full-Duplex.

Blinks green when collisions occur on port.

No display when port is operating in HDX

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

IMC Networks Giga-AccessEtherLinX-II Manuel d'instructions Page 32