Imc-networks Management Module SNMP Manuel d'utilisateur télécharger pdf (Page 10)

the iView² CD. For information regarding the use of the iConfig utility, refer

to the iConfig utility help file.

About Serial Port Configuration

The SNMP Management Modules used with the iMediaChassis series feature

a serial port that includes a DB-9 serial connector. To connect an

iMediaChassis series to a terminal/computer, use a straight-through (pin-to-

pin) cable. If the computer/terminal’s port is not compatible with a DB-9

COM port, use the pin connection chart for reference in making a cable.)

Make sure the cable length is less than 50 feet (15.24 meters). Plug one end

of the cable into the DB-9 connector and the other into the appropriate port

on the computer/terminal.

Set the computer/terminal for VT-100 emulation. The serial port on the

computer/terminal should be set for: 38.4K baud, 8 data bits, 1 stop bit, no

parity, no flow control. The F2 key functions as a Delete key on VT-100

emulators.

Serial Adapter Pin Connection

RJ-45 Pin # DB-9 Pin # Function

5 2 Transmit (OUT)

7 3 Receive (IN)

8 5 Ground

1-4, 6 1, 4, 6 - 9 Reserved

Main Serial/Telnet Configuration Screen

After running through an initial self-test, the screen will display the following

message: "Press Enter for Device Configuration." Press Enter for the main

configuration screen, which includes the following displays:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Imc-networks Management Module SNMP Manuel d'utilisateur Page 10