IMC Networks iMcV-T1/E1/J1-LineTerm TP/Fiber-CWDM-SM1530-SC Manuel d'instructions télécharger pdf (Page 11)

This feature can be controlled by SNMP-Management software (iView

) when the

HOST iMcV-T1/E1/J1-LineTerm module is installed in a managed chassis.

T1, E1 and J1 Selection

This switch selects the data rate to use on the copper line. The data rate selections

available include the following:

•

T1/J1

(1.544 Mbps +/- 32 ppm)

•

(2.048 Mbps +/- 32 ppm)

By default this feature is set to

T1.

This feature can be selected only by setting the DIP Switches manually.

Remote Management

A DIP Switch enables or disables the Remote Management mode. By default this

feature is Disabled. Remote Management must be enabled on the REMOTE module.

This allows all SNMP-configurable features for the REMOTE modules to be configured

from the HOST module.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

IMC Networks iMcV-T1/E1/J1-LineTerm TP/Fiber-CWDM-SM1530-SC Manuel d'instructions Page 11